Fluker's Clamp Light Instructions

Fluker's Clamp Light Instructions. Fluker's Clamp Lamps are designed to provide light and heat over a terrarium. Many reptile species like to bask in the light. Clamp lights clamp safely to the side of tanks and terrariums. The lamps come in several sizes and can accommodate both incandescent bulbs and ceramic heat emitters.

Step 1

Unscrew the wing nut on the clamp by turning it counterclockwise.

Step 2

Place the small ball on the end of the metal holster into the space behind the screw on the clamp. The metal on this part of the clamp is angled slightly to properly hold the ball. Hold the holster in place until you get the lamp positioned.

Step 3

Place the white cylinder on the back of the lamp into the two large grips on the clamp. Ensure you are still holding the holster ball in the other side of the clamp.

Step 4

Rotate the wing nut in a clockwise direction to tighten it. Release the clamp lamp and both the lamp and the holster should be secured together by the clamp.

Step 5

Slide the black plastic-covered leaves of the holster around any slender wall or structure to secure the lamp in an upright position.

References

• Fluker's: Fluker's Clamp Lamp Installation
• Fluker's: Clamp Lamps