Steps to Wrap Horse Legs

---

     Do you need to know how to wrap horse legs for support?

Are you interested in utilizing your equine for show or jumping? If so, the information in this guide is a must read. The info included in this article can help you to wrap the horse's legs securely and effectively.

Wrapping up a horse is performed for many reasons. It might be used for support, safety, and as a wound treatment. Different folks may prefer different kinds of wrap and may also have different techniques of wrapping, especially in the direction of the wrap. Firm and steady pressure is of the utmost importance and it needs to be applied over the entire leg. The aim is to have an ideal blend of support and comfort for the equine.

A well applied wrap can tremendously decrease swelling on the horse's lower limbs. It can additionally hold a wound dressing in place, minimize bleeding and offer support for injured structures. But utilized incorrectly, wrapping can harm fragile tendons. Wrapping is commonly done after a lengthy strenuous ride. It will keep the horse's lower limbs from becoming swollen.

Here's how to wrap horse legs:

1. Make sure the equine's leg is clean. Wipe with a clean material to get rid of dirt and debris.

2. Comfort must always be in mind. Locate and use wraps that you and the horse are comfortable with. Keep in mind that when the quilt applied beneath is thicker, it is less likely that your horse's leg can get hurt.

3. Squat down on the ground by the leg that you need to wrap. Make sure that your wrap is rolled for easier unrolling and wrapping later.

4. Apply any type of liniment that you want to use as a brace. Make certain the liniment will not burn the horse's leg. Mild substances can be quite effective but liniments are not essential.

5. Take the edge of the pillow wrap and put it on the equine's leg and tug towards the back to wrap it around.

6. Proceed with wrapping the pillow wrap around and ensure that it is snugly placed on the equine's leg so it doesn't slide down. Not so snug that it cuts of circulation. The pillow wrap must cover from under the knee to down and around the ankle.

7. Once you have finished wrapping with the pillow wrap, support it with your hand and take the flannel wrap or bandage.

8. Now, start wrapping using the bandage. Begin from the middle.

9. The direction of wrapping should be the same as with the pillow wrap.

10. As you wrap around the bandage from the middle, wrap it downwards and make sure that every area is covered as you carry on wrapping.

11. Once you reach the most bottom part, start going up the horse's legs. Just continue on going up until the wrap runs out.

12. When you are finished, check if the wrapping is smooth and the Velcro should be pointing towards the back. Ensure the wrap is not too tight.

13. Don't be lazy and get contented with the wrapping immediately. Evaluate the wrapping job. See if it is snugly fitted without inducing too much discomfort to the horse. If you are not completely content, you seriously should remove it and do it again.

If you thought this guide on how to wrap horse legs and riding it was helpful, wait 'till we send you our FREE Horse Training DVD. Our site includes natural horsemanship training, horse training tips, techniques, and much more of EasyHorseTraining.com's acclaimed training methods.

http://www.easyhorsetraining.com/510/how-to-wrap-a-horses-legs-for-support for our FREE Horse Training DVD. http://www.easyhorsetraining.com includes natural horse training, horse training tips, techniques, and much more.