Tips in Setting up Electric Fences

When you have made your brain that the electric dog fence is easily the most appropriate kind of containment for the dog, concentrate on the proper installing of this mechanism. However, learning the location you want to pay for before buying an electrical dog fence. The whole package includes a transmitter with chance to enclose a region of around 25 acres. Likewise, additional cables are essential for larger spaces. You will need no less than 500 feet of wire that will encircle one-third in the land.

Wires and Transmitter

Produce a sketch whilst in your mind that corners must be circular because right angles confuse the transmitter. The wire forming the border must make an unbroken circle to the transmitter.

The transmitter must positioned in a dry and secure such as your garage. Make sure the transmitter isn't placed within a breaker box. Avoid potential intervention by installing the transformer far away from hot water heaters or air-conditioning units. It is recommended that you bury the wires three inches under the ground. When the wires of the electric dog fence show, you'll find the risks of tripping over them or becoming cut through the lawn mower.

Basic Reminders

You will need to see how close you would like your dog so that you can arrive at the boundary of the electric dog fence without finding a warning. Adjustments can be made at the indoor transmitter. Some systems work up to 30 feet from the boundary. Give your dog enough room to roam around and play without feeling any uneasiness.

• Do not install the wire alongside electric and telephone wires, television cables and antenna or near satellite dishes.
• Check with your local utilities before installation if you're not sure about the location of the cable or utility lines.
• Never put your transmitter within a barn or shed. Often there is the potential risk of electric shock or fire if the transmitter is confronted with water. This may also sustain damages as a result of inclement weather.
• Install the transmitter first. Make sure to ground it as recommended by the manufacturer.
• Position the wire along your proposed boundary.
• Connect the end with the boundary wires towards the transmitter. Turn the machine on.
• Test the collar to be sure it's working properly. The collar should give off an audible alert because you approach the boundary.
• If it is all totally working well, start digging a trench around three inches deep along your previously planned boundary. Avoid putting the boundary wire towards the chain-link