Outboard Motor Troubleshooting

For a sailing enthusiast to take a boat ride smooth and trouble, the boat must be kept in good condition. The outboard motor is undoubtedly an important and main vessel. While on the run, the outboard motor can go wrong in many respects. Learn about the problems of outboard and repairs can certainly save money would be needed to tow the boat to the dock or marina.Tips to avoid problems of outboard motorCheck fuel level and fuel connections is an important task to avoid stagnation of motorboats. There are some people who do not care at all about the fuel required for engine runs. It is also necessary to verify the proper operation of the fuel lines. Check if not drowned, broken, damaged or curly. You should also check and see if fuel leaks. Always use fresh fuel is not at all contaminated. Make sure the batteries are turned on and the kill-switch online.

Also make sure the batteries are properly connected, and the seats are not dirty or rusty.In the case of the traction motors start, make sure that the cord is not worn or damaged in any way. We recommend keeping an extra pull the rope in the boat. Make sure the engine oil and gearbox is at an appropriate level. Also check if the color of oil gearbox is white. If so, that has been contaminated by water. Make sure the propeller is turning unobstructed manner. Have to change the drive after every 100 hours in salt water, or a year.Troubleshooting OutboardStart troubleshooting by inspecting the connection of the spark plug wires. See if they are connected correctly, as a little thing can cause the engine does not exist. Also check and see if the battery is connected to the outboard motor in an appropriate manner. It is also necessary to take into account "the head of the faults.

 

The power head is a box that is placed on the engine, which supplies electricity to the spark plug. If not working properly, the engine will not get the power needed to start. Then, you have to take the assistance of a technician certified outboard motor.Check the water flow passes through the motor, preventing engine overheating. The motor running hot means that there is insufficient water flow to the engine. Insufficient water flow is because if the propeller is damaged pump.

The propeller of the pump is at the bottom of the engine is a round disk with drivers who are responsible for the movement of water through the engine. If the boat does not move when you put the engine running, probably pin the propeller is damaged. In this case, just turn the shaft, but the propeller does not move. To resolve this problem, the pin has to be replaced.With the above steps, most of the problems of outboard motor can be resolved, and you can enjoy your navigation. By now you should have learned that solving problems outboard is easy, and do not necessarily have to take his boat to a shipyard for repairs. If the problems are too serious, then you need to repair the engine of a technical certificate outboard.